 |
| Quantity: | |
|---|---|
HP700E
Catcast
8517623990
HP700E 8 in 1 hashcode HD Encoder
Main Specs
1) Input Interface: HDMI (x8)
2) HD Format: 720p@50/60, 1080i@50
3) Output Interface: RJ45 100/1000Mbps
4) Output Protocol: RTMP/UDP/RTP
5) OS: Linux (Centos7.2)
6) Power: AC110/220 50/60Hz
Product Picture
The type of the equipment is HP700E, size is 1U chassis (45x482x250 mm3 ), power consumption is less than 70W, about 4Kg in weight. Its appearance and rear shown below:
Product Connection Diagram
Application Software
Preview & Live Stream Broadcast
The main interface of software:
When the equipment is powered on, it will automatically run the software "Preview & Live Broadcast Stream", with its main interface as shown above. If the software is closed, you don’t need to restart the equipment. Right-click the desktop and choose "Open in Terminal" item, then type in the terminal as "./run.sh" & "Enter key". Work settings are as follows:
1) Software automatically runs: activate the "Auto start" function (hook means activation) on the upper right corner of the main interface.
2) Check the working state: each upper-right corner message will display the current RTMP working state. Green for normal, Red for abnormal, Gray for closing.
3) Check the RTMP address: click the "URL" button. You can quickly view all the RTMP addresses. 4) Full screen viewing: double-click any of the small screens, you can watch the full screen, double-click again will return to the small screen.
5) Close the preview screen: click the button you close the preview screen; this will save CPU resources.
Encoding Parameters Setting
Click on the "Stop" button to stop coding, and then click any of the small screens. The settings encoding parameters interface will pop up:
1) Click on the Channel drop-down list, choose a channel number (1~8).
2) Click on the Quality drop-down list, choose an encoding quality: Super (2300Kbps), Ultra (2000Kbps), Excellent (1200Kbps), Good (1000Kbps), Fair (800Kbps), Poor (600Kbps), Mobile (400Kbps) 3) Activate the RTMP settings bar (hook means activation), type the address and audio delay (0~8000 ms) of the streaming media server.
4) Activate the UDP/RTP settings bar (hook means activation), type the address, port number (1024~65535), and audio delay (0~8000 ms) of the streaming media server.
5) As a comparison (or reference) input, you need to set the channel number of its corresponding.
6) Set new Logo and its location: activate "Add Logo Enable" function (hook means activation), the logo file into the specified directory, type x and y coordinate.
7) After all settings are completed, click the "Save" button to save and exit.
HP700E 8 in 1 hashcode HD Encoder
Main Specs
1) Input Interface: HDMI (x8)
2) HD Format: 720p@50/60, 1080i@50
3) Output Interface: RJ45 100/1000Mbps
4) Output Protocol: RTMP/UDP/RTP
5) OS: Linux (Centos7.2)
6) Power: AC110/220 50/60Hz
Product Picture
The type of the equipment is HP700E, size is 1U chassis (45x482x250 mm3 ), power consumption is less than 70W, about 4Kg in weight. Its appearance and rear shown below:
Product Connection Diagram
Application Software
Preview & Live Stream Broadcast
The main interface of software:
When the equipment is powered on, it will automatically run the software "Preview & Live Broadcast Stream", with its main interface as shown above. If the software is closed, you don’t need to restart the equipment. Right-click the desktop and choose "Open in Terminal" item, then type in the terminal as "./run.sh" & "Enter key". Work settings are as follows:
1) Software automatically runs: activate the "Auto start" function (hook means activation) on the upper right corner of the main interface.
2) Check the working state: each upper-right corner message will display the current RTMP working state. Green for normal, Red for abnormal, Gray for closing.
3) Check the RTMP address: click the "URL" button. You can quickly view all the RTMP addresses. 4) Full screen viewing: double-click any of the small screens, you can watch the full screen, double-click again will return to the small screen.
5) Close the preview screen: click the button you close the preview screen; this will save CPU resources.
Encoding Parameters Setting
Click on the "Stop" button to stop coding, and then click any of the small screens. The settings encoding parameters interface will pop up:
1) Click on the Channel drop-down list, choose a channel number (1~8).
2) Click on the Quality drop-down list, choose an encoding quality: Super (2300Kbps), Ultra (2000Kbps), Excellent (1200Kbps), Good (1000Kbps), Fair (800Kbps), Poor (600Kbps), Mobile (400Kbps) 3) Activate the RTMP settings bar (hook means activation), type the address and audio delay (0~8000 ms) of the streaming media server.
4) Activate the UDP/RTP settings bar (hook means activation), type the address, port number (1024~65535), and audio delay (0~8000 ms) of the streaming media server.
5) As a comparison (or reference) input, you need to set the channel number of its corresponding.
6) Set new Logo and its location: activate "Add Logo Enable" function (hook means activation), the logo file into the specified directory, type x and y coordinate.
7) After all settings are completed, click the "Save" button to save and exit.
