 |
| Quantity: | |
|---|---|
HPM316
Catcast
HPM316 IP to DVB-T Modulator
Product Overview
HPM316 is a cost-effective DVB-T modulator developed according to DVB-T (EN300744) standard. It has 128*3 IP inputs. After multiplexing and modulating process, it gives 16 DVB-T non-adjacent carriers (50MHz~900MHz) output through the RF output interface. To meet customers’ various requirements, this device is also equipped with data port for 8 MPTS output over UDP and RTP. This is very adaptable to newly generation DTV broadcasting system.
Key Features
Support maximum 3*128 IP input (MPTS/SPTS) over UDP and RTPprotocol
Support 8 MPTS Output
Support 16 groups DVB-T modulating
Support 6 Serial TS Input (AnyMultiplex)
RF output : 50~900MHz , Any Settings
Integrated multiplexing and modulatingfunctions
Support accurate PCR adjusting/PID Remapping/PSI/SI rebuilding and editing
Web-based NMS management
Specifications
Modulation | Standard | EN300744 |
| FFT mode | 2K | |
| Bandwidth | 6M, 7M, 8M | |
| Constellation | QPSK、16QAM、64QAM | |
| RF out | 16 carriers DVB-T | |
| RF frequency | 50~900MHz，1kHz step | |
| RF output level | -24dBm~0dBm | |
| MER | ≥40db | |
| Guard Interval | 1/4, 1/8, 1/16, 1/32 | |
| FEC | 1/2, 2/3, 3/4, 5/6, 7/8 |
| IP Input | 3*128 IP(SPTS/MPTS) input over UDP and RTP, RJ45,1000M/100M, Unicast/Multicast | |
| ASI input | 6 ASI input, DVB standard, BNC connector | |
| System | LCD/Keyboard operating and web-based NMS support | |
| Ethernet software upgrading | ||
| General | Dimension (W*D*H) | 482mm×340mm×45mm |
| Temperature | 0~45 ℃ (work) ； -20~80 ℃ (storage) | |
| Power supply | AC 110V±10%，50/60Hz AC 220V±10%，50/60Hz |
HPM316 IP to DVB-T Modulator
Product Overview
HPM316 is a cost-effective DVB-T modulator developed according to DVB-T (EN300744) standard. It has 128*3 IP inputs. After multiplexing and modulating process, it gives 16 DVB-T non-adjacent carriers (50MHz~900MHz) output through the RF output interface. To meet customers’ various requirements, this device is also equipped with data port for 8 MPTS output over UDP and RTP. This is very adaptable to newly generation DTV broadcasting system.
Key Features
Support maximum 3*128 IP input (MPTS/SPTS) over UDP and RTPprotocol
Support 8 MPTS Output
Support 16 groups DVB-T modulating
Support 6 Serial TS Input (AnyMultiplex)
RF output : 50~900MHz , Any Settings
Integrated multiplexing and modulatingfunctions
Support accurate PCR adjusting/PID Remapping/PSI/SI rebuilding and editing
Web-based NMS management
Specifications
Modulation | Standard | EN300744 |
| FFT mode | 2K | |
| Bandwidth | 6M, 7M, 8M | |
| Constellation | QPSK、16QAM、64QAM | |
| RF out | 16 carriers DVB-T | |
| RF frequency | 50~900MHz，1kHz step | |
| RF output level | -24dBm~0dBm | |
| MER | ≥40db | |
| Guard Interval | 1/4, 1/8, 1/16, 1/32 | |
| FEC | 1/2, 2/3, 3/4, 5/6, 7/8 |
| IP Input | 3*128 IP(SPTS/MPTS) input over UDP and RTP, RJ45,1000M/100M, Unicast/Multicast | |
| ASI input | 6 ASI input, DVB standard, BNC connector | |
| System | LCD/Keyboard operating and web-based NMS support | |
| Ethernet software upgrading | ||
| General | Dimension (W*D*H) | 482mm×340mm×45mm |
| Temperature | 0~45 ℃ (work) ； -20~80 ℃ (storage) | |
| Power supply | AC 110V±10%，50/60Hz AC 220V±10%，50/60Hz |
