1550nm Max 27db EDFA Erbium-Doped Fiber Amplifier with Pump Laser

1550nm Erbium-Doped Fiber Amplifier

Model: HPA-1000 Series

Technical Specifications

Contents

I. Products Overview

HPA1000 series EDFA, its core components adopt the world's top brand pump laser and erbium-doped fiber. The optimized optical design and production process ensure the best optical performance. The perfect electronic controlled modes of APC (automatic power control), ACC (automatic current control) and ATC (automatic temperature control) circuits are adopted to ensure high stability and reliability of the output power, at the same time, it also guarantees excellent optical path index.

Optional dual fiber inputs, in fact, built-in with a set of complete optical switch system , which can be used as the backup of A and B optical path. When the main optical line fails or lower than the threshold value, the device will automatically switch to the standby optical line to ensure the continuous operating of the device. The product is mainly used in optical fiber ring network or redundant backup network, It is featured in short switching time (< 8ms), low loss (< 0.8dbm ）, and can be forced manually switched.

MPU (microprocessor) with high stability and precision is adopted in the system. The optimized thermal structure design, good ventilation and heat dissipation design ensure the long life and high reliability of the device. Based on the powerful network management function of TCP / IP protocol, network monitoring and head-end management can be carried out for the status of multiple node equipment through RJ45 network management interface, supporting multiple power supply redundancy configurations, which improved the practicability and reliability of the device.

II. Features

1 It adopts the world's top brand pump laser and erbium-doped fiber.

2 Perfect APC, ACC and ATC optical circuit design ensures low noise, high output and high reliability of the device in the whole operating band (1530 ~ 1563nm).

3 It has the function of automatic protection of low input or no input. When the input optical power is lower than the set value, the laser will automatically shut down to protect the safety of the laser.

4 Optional dual fiber inputs.

5 Output adjustable, adjustment range:  0~-4dBm.

6 Max output reaches 27dBm.

7 Fully automatic case temperature control and intelligent fans, the fans start to work when the case temperature reaches 35 ℃.

8 Built-in dual power supply, automatically switched and hot plug in/out supported.

9 The operating parameters of the whole device are controlled by microprocessor, and the LCD status display on the front panel has many functions such as laser status monitoring, parameter display, fault alarm, network management, etc.; once the operating parameters of the laser deviate from the allowed range set by the software, the system will alarm promptly.

10 Standard RJ45 interface is provided, supporting SNMP and WEB remote network management.

III. Main Technical Index

IV. Diagram

4.1 Single Pump EDFA Diagram

4.2 Dual Pumps EDFA Diagram

V. Panel Instructions

5.1 Front Panel

5.2 Rear Panel

5.2.1 Dual 220V/110V

5.2.2 Dual 220V/110V+-48V

5.2.3 Dual-48V

VI. Order Guide

It is a 1550nmErbium-Doped Fiber Amplifier of CatCast brand with one output port and the output power per port is 22dBm, which the connector is SC/APC, the power configuration is dual-power hot plug with optical port test and electrical port test.

VII. Product Series

VIII. Applications

1、 CATV network.

2、 FTTH、FTTx PON、Triple-play

3、 IP/QAM data business

4、 Network upgrading and capacity expansion based on existing optical fiber resource.