 |
| Quantity: | |
|---|---|
HPR6500 IP to 32 Channels NTSC PAL Analog Modulator
Outline
HPR6500 is Catcast’s high-density IP to analog RF Modulator that carry 32 non-adjacent channels in a 2U box. Browser based user interface facilitate system setup and maintenance efficiency. This outstanding headend system consume much less power than other competitors, eventually reduce operating cost and extend life cycle.
Key Features
System provides 4 GE input ports for both MPTS and SPTS video streams
Compact 2RU design with 5 cooling fans and dustproof screen
Receive up to 32 IP streams and output up to 32 channels in NTSC or PAL standard
Easy configuration and software upgrade by built-in Web UI
Optional function on teletext and overlay
Support BISS decryption, optional
System Diagram
Specification
| GE INPUT | |
| Input Connector | 4x RJ45 |
| Transport Protocol | UDP, RTP |
| Addressing | Unicast, Multicast |
| MPEG Transport | SPTS, MPTS |
| TS DECODING | |
| Video Resolutions | Up to 1080P |
| Video Form | MPEG1/2/4; H.264; H.265; AVS; AVS+; VC1 |
| Audio Form | MPEG-1 Layer I/II/III; WMA, AAC,AC3 |
| MAX decoding stream | 32 channels |
| Additional capabilities | Teletext; BISS decrypt |
| Aspect Ratio Control | 4:3(Letter & Box); 16:9 |
| RF OUTPUT | |
| Connector | F female connector |
| Number of RF channels | Max 32,Fully agile modulated channels |
| Supported Standard | NTSC, PAL BG/DI/DK |
| STD,HRC and IRC | Supported |
| Output Frequency | 48 ~ 860 MHz |
| Out-band Rejection | ≥ 60dB |
| Flatness | -2dB per carrier |
| Return Loss | 12 dB (min) |
| Differential Gain | ≤ 5% |
| Group Delay Response | ≤ 100nS |
| 2K Factor | ≤ 2% |
| Output Level | ≥ 53dBmV combined* |
| Adjust Range | 20dB Per 32CHs |
| 10dB Per CH | |
| Audio Output Format | MONO |
| Audio Level Adjust Range | 0 ~ 100 % |
| RF Test Point | -20 dB Relative to output |
| GENERAL | |
| Management | NMS |
| Language | English, Spanish |
| Power Supply | AC 90 ~ 264 V |
| Consumption | <240 W |
| Weight | 8.5 KG |
| Dimension | |
*NOTICE: The analog output level should greater than the digital output level at 5dB, when these two signals are combined together.
HPR6500 IP to 32 Channels NTSC PAL Analog Modulator
Outline
HPR6500 is Catcast’s high-density IP to analog RF Modulator that carry 32 non-adjacent channels in a 2U box. Browser based user interface facilitate system setup and maintenance efficiency. This outstanding headend system consume much less power than other competitors, eventually reduce operating cost and extend life cycle.
Key Features
System provides 4 GE input ports for both MPTS and SPTS video streams
Compact 2RU design with 5 cooling fans and dustproof screen
Receive up to 32 IP streams and output up to 32 channels in NTSC or PAL standard
Easy configuration and software upgrade by built-in Web UI
Optional function on teletext and overlay
Support BISS decryption, optional
System Diagram
Specification
| GE INPUT | |
| Input Connector | 4x RJ45 |
| Transport Protocol | UDP, RTP |
| Addressing | Unicast, Multicast |
| MPEG Transport | SPTS, MPTS |
| TS DECODING | |
| Video Resolutions | Up to 1080P |
| Video Form | MPEG1/2/4; H.264; H.265; AVS; AVS+; VC1 |
| Audio Form | MPEG-1 Layer I/II/III; WMA, AAC,AC3 |
| MAX decoding stream | 32 channels |
| Additional capabilities | Teletext; BISS decrypt |
| Aspect Ratio Control | 4:3(Letter & Box); 16:9 |
| RF OUTPUT | |
| Connector | F female connector |
| Number of RF channels | Max 32,Fully agile modulated channels |
| Supported Standard | NTSC, PAL BG/DI/DK |
| STD,HRC and IRC | Supported |
| Output Frequency | 48 ~ 860 MHz |
| Out-band Rejection | ≥ 60dB |
| Flatness | -2dB per carrier |
| Return Loss | 12 dB (min) |
| Differential Gain | ≤ 5% |
| Group Delay Response | ≤ 100nS |
| 2K Factor | ≤ 2% |
| Output Level | ≥ 53dBmV combined* |
| Adjust Range | 20dB Per 32CHs |
| 10dB Per CH | |
| Audio Output Format | MONO |
| Audio Level Adjust Range | 0 ~ 100 % |
| RF Test Point | -20 dB Relative to output |
| GENERAL | |
| Management | NMS |
| Language | English, Spanish |
| Power Supply | AC 90 ~ 264 V |
| Consumption | <240 W |
| Weight | 8.5 KG |
| Dimension | |
*NOTICE: The analog output level should greater than the digital output level at 5dB, when these two signals are combined together.
