Availability: | |
---|---|
Quantity: | |
HPR6400
Catcast
PAL NTSC SECAM 64 IP over SPTS MPTS to Analog System Modulator
HPR6400 is our latest product which is for IP to analog system specially. It supports max 64 IP over SPTS/MPTS input, afterdecoding, the programs will be modulated to 32 non-adjacent carriers output. Modulation model supports PAL, NTSC as well as SECAM standard.
Specification
Input | Interface/rate | 2 GE ports (max 64 IP input) Max 840Mbps for each GE input | ||
Stream | UDP, UDP / RTP, 1-7 packets, FEC, SPTS, MPTS | |||
Transport Protocol | UDP/RTP, unicast and multicast, IGMP V2/V3 | |||
Packet Length | 188 / 204 Bytes | |||
Decoding Parameters | Video | H.264/AVC Level 4.1 HP, MPEG-2 MP@HL | ||
Audio | MPEG-1/2 Layer 1/2, (HE-)AAC | |||
Data | Teletext, Teletext subtitles, DVB Subtitling | |||
Resolutions | 480I, 576I, 720P, 1080I, 1080P | |||
Aspect ratio | 4:3/16:9 | |||
Modulation Parameters | Number of channels | up to 32 | ||
Connectors | 75Ω, F-jack | |||
Frequency range | 47 – 862MHz, digital modulation | |||
Output level | maximum 112dBμV | |||
Return loss | ≥ 14dB | |||
Spurious frequency dist. | ≥ 60dB | |||
Stereo cross talk | > 55dB | |||
Residual carrier accuracy | 1% | |||
TV standard | PAL B/G/D/K/M/N, NTSC, SECAM (under development) | |||
Video-signal to noise ratio | ≥ 60dB | |||
Network | Management | 1 x 100 Base-T Ethernet (RJ 45) | ||
Interface | Data | 2 x 1000 Base-T Ethernet (RJ 45) | ||
Protocol | IEEE802.3 Ethernet, RTP, ARP, IPv4, TCP/UDP, HTTP, IGMPv2/v3 | |||
Others | Image resolution | up to 1080i | ||
CNR | 60 dB (after internal combining) | |||
SNR | > 53 dB (after internal combining) | |||
Sampling frequency | 48, 44.1, 32 | |||
Output volume adjustment | 0 - 100 % | |||
General | Demission | 420mm×440mm×44.5mm (WxLxH) | ||
Temperature | 0~45℃(operation), -20~80℃(storage) | |||
Power Supply | AC100V±10%, 50/60Hz or AC 220V±10%,50/60Hz |
PAL NTSC SECAM 64 IP over SPTS MPTS to Analog System Modulator
HPR6400 is our latest product which is for IP to analog system specially. It supports max 64 IP over SPTS/MPTS input, afterdecoding, the programs will be modulated to 32 non-adjacent carriers output. Modulation model supports PAL, NTSC as well as SECAM standard.
Specification
Input | Interface/rate | 2 GE ports (max 64 IP input) Max 840Mbps for each GE input | ||
Stream | UDP, UDP / RTP, 1-7 packets, FEC, SPTS, MPTS | |||
Transport Protocol | UDP/RTP, unicast and multicast, IGMP V2/V3 | |||
Packet Length | 188 / 204 Bytes | |||
Decoding Parameters | Video | H.264/AVC Level 4.1 HP, MPEG-2 MP@HL | ||
Audio | MPEG-1/2 Layer 1/2, (HE-)AAC | |||
Data | Teletext, Teletext subtitles, DVB Subtitling | |||
Resolutions | 480I, 576I, 720P, 1080I, 1080P | |||
Aspect ratio | 4:3/16:9 | |||
Modulation Parameters | Number of channels | up to 32 | ||
Connectors | 75Ω, F-jack | |||
Frequency range | 47 – 862MHz, digital modulation | |||
Output level | maximum 112dBμV | |||
Return loss | ≥ 14dB | |||
Spurious frequency dist. | ≥ 60dB | |||
Stereo cross talk | > 55dB | |||
Residual carrier accuracy | 1% | |||
TV standard | PAL B/G/D/K/M/N, NTSC, SECAM (under development) | |||
Video-signal to noise ratio | ≥ 60dB | |||
Network | Management | 1 x 100 Base-T Ethernet (RJ 45) | ||
Interface | Data | 2 x 1000 Base-T Ethernet (RJ 45) | ||
Protocol | IEEE802.3 Ethernet, RTP, ARP, IPv4, TCP/UDP, HTTP, IGMPv2/v3 | |||
Others | Image resolution | up to 1080i | ||
CNR | 60 dB (after internal combining) | |||
SNR | > 53 dB (after internal combining) | |||
Sampling frequency | 48, 44.1, 32 | |||
Output volume adjustment | 0 - 100 % | |||
General | Demission | 420mm×440mm×44.5mm (WxLxH) | ||
Temperature | 0~45℃(operation), -20~80℃(storage) | |||
Power Supply | AC100V±10%, 50/60Hz or AC 220V±10%,50/60Hz |